Brother P-touch E550W Manual de configuración rápida - Página 29

Navegue en línea o descargue pdf Manual de configuración rápida para Etiquetadora Brother P-touch E550W. Brother P-touch E550W 48 páginas.

Close the rear cover.

• Place the P-touch on a flat surface as shown in the

illustration, and then attach the rear cover.

• If you cannot attach the rear cover, check to ensure the white

lever (1) is in the up position. If not, lift the lever, and then

attach the cover.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon

to be discharged with the tape. The tape may no longer be functional after the ink

ribbon discharges.

• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high

humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed

package.

Extra Strength Adhesive Tape:

• For rough and textured surfaces, we recommend using Extra Strength Adhesive Tape.

• Although the instruction sheet included with the Extra Strength Adhesive Tape cassette

recommends cutting the tape with scissors, the tape cutter that this P-touch is equipped

with is able to cut Extra Strength Adhesive Tape.

Press the

(Power) button to turn the P-touch on.

Press and hold the

• Your P-touch has a power saving function that automatically turns itself off if no key is pressed

within a certain time, under certain operating conditions. Refer to the "Auto Power-Off Time"

for details.

If you use the AC adapter or Li-ion battery, you can change the setting of the auto power-off

time.

When you use alkaline batteries or Ni-MH batteries, the auto power-off time cannot be changed.

(The time is fixed to 20 minutes.)

Press the Menu key, select "Auto Power Off" using the

OK or Enter key.

Select the battery shown on the LCD display by using the

using the

"AC Adapter" or "Li-ion Battery" can be selected.

Press the OK or Enter key.

Turning Power On/Off

(Power) button again to turn the P-touch off.

key.

key, and then press the

key and set the value

Turning Power On/Off

ENGLISH