Brother P-touch E550WVP Manual de configuración rápida - Página 25

Navegue en línea o descargue pdf Manual de configuración rápida para Etiquetadora Brother P-touch E550WVP. Brother P-touch E550WVP 47 páginas.

Use the AD-E001 (AC adapter) for this P-touch labeling system. Connect the AC adapter

directly to the P-touch labeling system.

The AD-18 or AD-24ES cannot be used.

Insert the plug on the AC adapter cord into the connector marked DC IN 12V on the

P-touch labeling system.

Insert the AC adapter plug into a standard electrical outlet.

• Turn the P-touch labeling system off before disconnecting the AC adapter.

• Do not pull or bend the AC adapter cord.

• When disconnected from the power and battery for more than two minutes, all text and format

settings will be cleared.

• Downloaded symbols, templates and databases will be saved, even with no power available.

• After the AC adapter plug is inserted into the electrical outlet, it may take a few seconds until

the

(Power) button is enabled.

To safeguard and backup the P-touch labeling system's memory, when the AC adapter is

unplugged it is recommended to have rechargeable Li-ion batteries (BA-E001), AA-size alkaline

batteries (LR6) or Ni-MH rechargeable batteries (HR6) installed in the P-touch labeling system.

 Installing the Rechargeable Li-ion Battery

Open the rear cover by pressing the cover latch.

1. Rear cover

2. Cover latch

Power Supply