Brother P-touch PT-D610BT Manual - Página 2

Navegue en línea o descargue pdf Manual para Etiquetadora Brother P-touch PT-D610BT. Brother P-touch PT-D610BT 9 páginas.
También para Brother P-touch PT-D610BT: Manual (9 páginas), Manual de inicio rápido (9 páginas)

Imprimir página

• DO NOT use the Label Maker in special environments, such as near medical equipment. Electromagnetic

waves may cause the medical equipment to malfunction.

• Users with heart pacemakers must move away from the Label Maker if they sense any abnormalities. Then,

immediately seek the advice of a medical professional.

• DO NOT forcibly bend or pull the USB Cable or AC Adapter.

• DO NOT touch the AC Adapter or plug with wet hands, otherwise an electrical shock may occur.

• Use only the specified AC Adapter.

• Use only the AC Adapter and USB Cable included with your Label Maker. Failure to do so may result in an

injury to yourself or others, or damage to the Label Maker, or other property. Brother does not assume any

responsibility for any accident or damage resulting from not using the specified AC Adapter and USB Cable.

• DO NOT connect the included AC Adapter and USB Cable to other products.

• Use the AC Adapter with standard electrical sockets (AC 100 V - 240 V 50/60 Hz).

• Insert the plug firmly into the electrical outlet.

• DO NOT use the batteries if they are damaged or leaking.

• Keep batteries away from infants. If batteries are ingested, contact emergency services immediately.

• DO NOT use sharp objects, such as tweezers or a metallic pen, to remove or replace batteries.

• If liquid (electrolyte) from the batteries gets into the eyes, wash them immediately with clean water. Contact

emergency services immediately.

• DO NOT solder connections to the batteries.

• DO NOT use the batteries with the polarity (+) (-) reversed.

• DO NOT connect the + and - terminals with metal objects such as wire.

• DO NOT incinerate the batteries or dispose of them with household waste.

• Keep fingers and other body parts away from the Cutter Unit.

• DO NOT touch the Cutter Unit's blade or insert your fingers inside the

Tape Exit Slot, otherwise fingers and other body parts may be injured.

• DO NOT touch any metal parts near the Print Head. The Print Head

becomes very hot during and immediately after use. DO NOT touch it

directly with your hands.

CAUTION

Failure to observe instructions and warnings could result in minor or moderate injuries.

Label Maker, USB Cable, AC Adapter, Alkaline Batteries

• Use only the specified AA alkaline batteries (LR6).

• DO NOT use combinations of old and new batteries or combinations of different types, charging levels,

manufacturers, or models.

• DO NOT drop the Label Maker when removing it from the box or relocating it, otherwise you may get injured.

• Be careful when closing the Tape Cassette Compartment Cover. There is a risk of injury if your finger gets

pinched between the upper and lower parts of the cover.

• When you are not using the Label Maker, store it out of the reach of children. In addition, do not allow

children to put the Label Maker parts or labels in their mouths. If any object has been swallowed, seek

medical attention immediately.

• DO NOT leave the Label Maker or any tape within the reach of babies and children.

• Store the Label Maker on a flat, level, and stable surface.

• Remove the batteries and disconnect the AC Adapter if you do not intend to use the printer for an extended

period of time.

• DO NOT press on the Liquid Crystal Display (LCD).

• When disconnecting the AC Adapter from the electrical outlet, always hold the AC Adapter.

• DO NOT overload an electrical circuit with the AC Adapter.

• DO NOT open the Tape Cassette Compartment Cover when operating the Cutter Unit.

• DO NOT apply excessive pressure to the Cutter Unit.

Regulation

Federal Communications Commission (FCC) Supplier's Declaration of Conformity (USA)

Responsible Party: Brother International Corporation

Product Name:

Model Number:

Label Maker complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) Label Maker may not cause harmful interference, and (2) Label Maker must

accept any interference received, including interference that may cause undesired operation.

Label Maker has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. Label Maker generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If the Label Maker

does cause harmful interference to radio or television reception, which can be determined by

turning the Label Maker off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the Label Maker and receiver.

• Connect the Label Maker into an outlet on a circuit different from that to which the receiver is

• Consult the dealer or an experienced radio/TV technician for help.

1 Print Head

• This transmitter must not be co-located or operated in conjunction with any other antenna or

2 Cutter Unit

Important

• The enclosed interface cable should be used in order to ensure compliance with the limits

• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the

RF Exposure Notice (USA)

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has

very low levels of RF energy that it deemed to comply without maximum permissive exposure

evaluation (MPE). [But it is desirable that it should be installed and operated keeping the radiator

at least 20cm or more away from person's body.]

CAUTION

RISK OF EXPLOSION IF BATTERIES ARE REPLACED WITH AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

International ENERGY STAR

The purpose of the International ENERGY STAR

development and popularization of energy-efficient office equipment. As an ENERGY

STAR

ENERGY STAR

200 Crossing Boulevard

Bridgewater, NJ 08807-0911, U.S.A.

TEL: (908) 704-1700

Brother Label Maker Electronic Labeling System

PT-D610BT

connected.

transmitter.

for a Class B digital device.

user's authority to operate the Label Maker.

Compliance Statement (US only)

Partner, Brother Industries, Ltd. has determined that this product meets the

guidelines for energy efficiency.

Program is to promote the