Fujitsu LifeBook P2110 Manual Bios - Página 5

Navegue en línea o descargue pdf Manual Bios para Portátil Fujitsu LifeBook P2110. Fujitsu LifeBook P2110 32 páginas. Lifebook p series
También para Fujitsu LifeBook P2110: Manual fácil (37 páginas)

Imprimir página

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies which ATA

devices are installed.

Main

Type:

Maximum Capacity:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Type:

• Auto

• None

• CD-ROM

• Hard Disk

Cylinders:

• A number

between 0

and 65,535

Heads:

• A number

between 1

and 16

PhoenixBIOS Setup Utility

Advanced

Security

Primary Master [TOSHIBA MK3017GAP-(PM)]

[Auto]

30006MB

[16 Sectors]

[Enabled]

[FAST PIO 4]

[Ultra DMA 4]

Select Item

-/Space

Select Menu

Enter

Figure 2. Primary Master Submenu

Default

[Auto]

–—

Note: Actual hard drive label shown may vary. Depending

on the drive type, information such as cylinders, heads and

sectors may also be displayed.

Power

Boot

Info

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Change Values

Select

Sub-Menu

Description

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected,

all of the following Set-up items do not appear. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and

Sectors for the drive. Select CD-ROM to select parameters for

CD-ROM drive.

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field

is changed by incrementing (pressing the [Spacebar]) or by typing

in the number.

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field

is changed by incrementing (pressing the [Spacebar]) or by typing

in the number.

M a i n M e n u

Exit

Item Specific Help

Setup Defaults

F10

Save and Exit