AEG L 87405 FL Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Lavadora AEG L 87405 FL. AEG L 87405 FL 32 páginas. Clothes washer
También para AEG L 87405 FL: Manual del usuario (28 páginas)
16
www.aeg.com
The related indicator comes on.
7.5 Stains/Prewash
Press this button to add the stain and the
prewash phase to a programme.
Press the button repeatedly to activate
one or both options. The related
indicator and the indicator bar illuminate
in the display.
• Stains: Use this option for laundry
with hard stains to remove.
When you set this option, put the
stain remover into compartment
This option increases the programme
duration.
This option is not
available with a
temperature lower than
40° C.
• Prewash: Use this option to add a
prewash phase before the washing
phase.
We recommend that you use this
option when you have very soiled
laundry.
This option increases the
programme duration.
8. SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Stains/Prewash and Extra
Rinse at the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
7.6 Spin
Press this button to:
• Decrease the maximum speed of the
programme spin phase.
The display indicates only
the spin speeds available
for the set programme.
• Deactivate the spin phase.
• Activate the Rinse Hold option.
Set this option to prevent fabrics from
creasing. The washing programme
ends with water in the drum. The
drum turns regularly to reduce
.
creasing.
The door stays locked. You must drain
the water to unlock the door.
7.7 Temperature
Press this button to change the default
temperature. When the display shows
and
, the appliance does not heat
the water.
• To activate/deactivate this option,
press Temp. and Spin at the same
time until the indicator
goes off.
You can activate this option:
• After you press Start/Pause : the
options and the programme knob are
locked.
• Before you press Start/Pause : the
appliance cannot start.
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Time Save and Delay Start at
the same time until the relevant
indicator comes on/goes off.
comes on/