AEG L 87406 FL Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Lavadora AEG L 87406 FL. AEG L 87406 FL 28 páginas. Clothes washer

Imprimir página
18 www.aeg.com
2.
Press button
programme continues.
8.7 Cancel a programme
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
8.8 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
flashes.
2.
Change the function set.

8.9 Open the door

While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Press button
symbol in the display goes off.
2.
Open the appliance door.
3.
Close the appliance door and press
button
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1.
2.
3.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
8.10 At the end of the
programme
• The appliance stops automatically.
4
again. The washing
to cancel the pro-
1
again to activate
1
4
. The indicator
4
. The door lock
. The programme or the
4
Deactivate the appliance.
Wait for some minutes.
Make sure that no water is in
the drum.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause but-
ton
4
goes off.
• The door lock symbol goes off.
• Press button
1
to deactivate the ap-
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appliance
again, the display show the end
of the last set programme. Turn
the programme knob to set a
new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is emp-
ty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
2.
Press the Start/Pause button
The appliance drain the water and
spin.
3.
When the programme is completed
and the door lock symbol goes off,
you can open the door
4.
Deactivate the appliance.
The appliance drain and spin au-
tomatically after approximately
18 hours.
4
.