Brother QL 570 - P-Touch B/W Direct Thermal Printer Manual de instalación y funcionamiento - Página 23

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Etiquetadora Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43 páginas. Professional label printer
También para Brother QL 570 - P-Touch B/W Direct Thermal Printer: Folleto (4 páginas), Manual del usuario (36 páginas), Manual del usuario (26 páginas), Manual del usuario (40 páginas), Manual de instalación y funcionamiento (45 páginas), Manual del usuario (2 páginas), Manual de instalación del software (15 páginas)

Installing the BRAdmin Light configuration utility for Windows

BRAdmin Light is a utility for the initial setup of Brother network connected devices. It can

also search for Brother products on your network, view the status and configure basic

network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com.

The following is the example for Windows Vista

•

If you require more advanced printer management, use the latest Brother BRAdmin

Professional utility version that is available as a download from

http://solutions.brother.com.

•

If you are using personal firewall software (e.g. Windows Firewall), BRAdmin Light

may fail to detect the unconfigured device. In that case, disable your personal

firewall software, try BRAdmin Light again. Re-start your personal firewall software

after the address information is set.

Click "Utility Installation".

This screen is the same screen as you

see when you insert the CD-ROM.

Click "BRAdmin Light" and follow the on-

screen instructions.

If the Windows Firewall is enabled on your PC,

the message "Do you wish to add this application

to the list of exceptions?" appears. Check your PC

environment and choose [Yes] or [No].

Setting your IP address, Subnet Mask and Gateway using

BRAdmin Light

Click [Start]-[All Programs(Programs)]-

[Brother]-[BRAdmin Light]. BRAdmin Light

will search for new devices automatically.

If you have a DHCP/BOOTP/RARP server in your

network, you don't have to do the following

operation, as the print server will automatically

obtain its IP address.

STEP