Brother QL-800 Manual de configuración rápida - Página 7

Navegue en línea o descargue pdf Manual de configuración rápida para Etiquetadora Brother QL-800. Brother QL-800 10 páginas. Dk label. dk tape
También para Brother QL-800: Manual de configuración rápida (10 páginas), Manual de seguridad del producto (11 páginas)

Imprimir página

8. Printing Using a Computer (P-touch Editor Lite)

Turn on the printer, then press and hold down the Editor Lite Button

until the green Editor Lite LED lights up.

NOTE

Editor Lite is set as the default mode.

Connect the USB cable to your computer.

NOTE

If you are connecting the printer via a USB hub, it may not be detected correctly.

After the USB cable is connected, a dialog box appears on the

computer screen.

(The following screens may differ depending on your operating

system, but the operating procedures are same.)

Windows Vista

Windows

7 / 8 / 8.1 / 10

Click Open folder to view files.

Editor Lite LED

Editor Lite Button

Click P-touch Editor Lite.

Double-click PTLITE10.

8. Printing Using a Computer (P-touch Editor Lite) (cont)

NOTE

• If you do not see the dialog box, it may be hidden behind an open software program

window. Minimise all windows to show the dialog box.

• It will take longer than usual to start P-touch Editor Lite when connecting the printer

to your computer for the first time. If the software does not start automatically when

you connect the printer, you may launch it from [My Computer]. Start P-touch Editor

Lite by double-clicking PTLITE10.EXE.

 When using Windows Vista

When connecting the device for the first time, perform the scan and then select the

[Always do this for software and games] check box on the dialog box displayed

when the scan completes. P-touch Editor Lite will start automatically the next time

you connect the QL-800.

P-touch Editor Lite starts.

IMPORTANT

Do not turn off the power or disconnect the printer while using P-touch Editor Lite.

 When using Macintosh

P-touch Editor Lite is not available for Macintosh. The [QL-800] icon is displayed

when the printer is connected to a Mac in the Editor Lite mode. Open [QL-800] from

the desktop, and then execute [Start Here Mac]. If P-touch Editor 5.1 and the driver

are not installed, a notification is displayed. Install them, and use P-touch Editor 5.1.