3
Introduction
Do not use paint thinner, benzene,
alcohol or any other organic solvents to
clean the machine. Doing so may cause
damage to the surface finish. Use a soft,
dry cloth to clean the machine.
Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of
injury.
Power Cord
Use only the authorized power source
(AC 220-240V) for the machine.
Use only the power cord included with
the machine.
Do not touch the power cord or power
plug with wet hands.
Do not overload the electrical outlet
sockets with too many appliances or
plug the power cord into a damaged
electrical outlet.
Do not cut, damage, alter or place heavy
objects on the power cord.
Follow these guidelines to avoid minor personal injury and damage to the
machine.
The Machine
Do not expose the machine to direct sunlight or near heaters or other hot appliances,
in any area exposed to extremely high or low temperatures, high humidity or dusty
areas. Doing so could cause the machine to malfunction.
Power Cord
If the machine will not be used for an extended period, remove the power cord from
the electrical outlet.
Cutter
Do not touch the blade of the cutter.
Do not open the RD Roll compartment cover when the cutter is operating.
Installation/Storage
Place the machine on a flat, stable
surface such as a desk.
WARNING
Do not put any heavy objects or objects
containing water on top of the machine.
If water or any foreign object enters the
machine, unplug the power cord and
contact the retail outlet where the
machine was purchased or your local
authorized service center. If you
continue to use the machine with water
or a foreign object in the machine, the
machine may be damaged or personal
injury could result.
Do not use the power cord if it is
damaged.
Make sure that the plug is fully inserted
in the power outlet. Do not use an outlet
that is loose.
Always hold the power cord when
unplugging the power cord from or
plugging it into electrical outlet. Do not
pull on the power cord. The wire in the
electrical cord may become damaged.
CAUTION
Do not place any heavy objects on top of
the machine.
Imprimir página