Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz Manual Bios - Página 22

Navegue en línea o descargue pdf Manual Bios para Portátil Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz. Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz 29 páginas. S6520 getting started guide (french)
También para Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz: Primeros pasos (2 páginas), Manual del usuario (12 páginas), Manual fácil (41 páginas), (Francés) Manual D'introduction (2 páginas)

Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz Manual Bios
L i f e B o o k S S e r i e s B I O S
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Supervisor
–—
Password is:
User Password is:
–—
Set Supervisor
–—
Password
Set User Password
–—
Minimum User
–—
Password Length:
Password on Boot:
Disabled
First Boot
Every Boot
On Automatic
Disabled
Wake up:
Enabled
Boot from
All
Removable Media:
Supervisor only
Flash Write:
Disabled
Enabled
Hard Disk Security:
–—
Owner
–—
Information:
TPM (Security
___
Chip) Setting

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
22
Default
Description
Clear
A display-only field. Set is displayed when the system supervisor password is set
and Clear when it is not.
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor Password may
be up to 32 characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. To cancel a password press the Enter
key instead of entering characters in the Enter New Password field and in the
Re-enter New Password field. When a Supervisor Password is set it must be
used to access the BIOS setup utility.
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets, changes or
cancels the User Password. A User Password may be up to 32 characters long
and must include only letters or numbers (no symbols). Passwords are NOT
case-sensitive. To cancel a password press [Enter] key instead of entering char-
acters in the Enter New Password field and in the Re-enter New Password field.
When a User Password is set it must be used to access the BIOS setup utility.
[0]
Supervisor can set password length (0 to 32) for user password. User cannot set
a password shorter than the minimum length.
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just once
after the Power On Self Test (POST) before the operating system will be read
from a disk. When set to Every Boot, a password (User or Supervisor) is required
every time after the Power On Self Test (POST) before the operating system will
be read from a disk. When set to Disabled no password is required.
[Disabled]
When disabled, password entry is not required when the system wakes up auto-
matically. When enabled, password entry is required upon wake up.
[All]
Supervisor only allows access to boot the computer to removable media after
the Supervisor Password is entered.
[Enabled]
When disabled, the BIOS Flash memory will be write protected.
–—
Configures hard disk security features
–—
Sets Owner information.
___
Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to
configure the Security Chip.