Fujitsu FUTRO S5010 Manual de instrucciones - Página 21

Navegue en línea o descargue pdf Manual de instrucciones para Servidor Fujitsu FUTRO S5010. Fujitsu FUTRO S5010 36 páginas.

Horizontal operating position

If you wish to operate the device in the horizontal operating position, use

the two feet supplied for horizontal operating position.

Mount the feet only on the device side shown in the diagrams.

Proceed as follows to prepare the device for the horizontal operating position:

Base feet

Operatingposition,horizontal

Horizontaloperatingposition

► Disconnect the cables if required.

► Lay the device on its right side as shown, on a stable, level and clean surface.

► Fit the feet on the housing (1). Make sure that you align the 4 clips (2) on the

feet with the corresponding openings in the housing.

► To ﬁx the feet, press the clips in the direction of the arrow (2) until they

engage noticeably in the openings.

To protect your device against unauthorised removal of the feet, the feet

can also be secured with two screws, each of type M2.5x5 mm. These

are not included in the delivery scope.

► Secure the feet with the screws (3).

Fujitsu

Getting started