Brother FAX-2845 Manual de configuración rápida - Página 10
Navegue en línea o descargue pdf Manual de configuración rápida para Fax Brother FAX-2845. Brother FAX-2845 16 páginas.
Imprimir página
11
Enter personal
information (Station ID)
The machine displays the date and time, and if you
set up the Station ID, it will add it to each fax you send.
a
Press Menu, 0, 3.
b
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Station ID
Fax:
c
Enter your telephone number (up to 20 digits)
on the dial pad, and then press OK. If your
telephone number and fax number are the
same, enter the same number again.
Station ID
Tel:
d
Use the dial pad to enter your name (up to
20 characters), and then press OK.
Station ID
Name:
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the last character, press c to move
the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, press Clear.
Press
One
key
time
2
A
3
D
4
G
5
J
6
M
7
P
8
T
9
W
For more details, see Entering text in the
Basic User's Guide.
e
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step a.
10
Two
Three
Four
times
times
times
B
C
2
E
F
3
H
I
4
K
L
5
N
O
6
Q
R
S
U
V
8
X
Y
Z
12
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature see Printing reports
in the Advanced User's Guide.
13
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press Menu, 0, 4.
b
Press a or b to choose Pulse (or Tone).
Press OK.
c
Press Stop/Exit.
14
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
Five
compatibility setting.
times
Note
A
If you are using an analogue telephone line you
D
can skip this step.
G
J
a
Press Menu, 2, 0, 1.
M
b
7
Press a or b to choose Basic(for VoIP).
T
Press OK.
c
9
Press Stop/Exit.
Fax Transmission Report
Set tone or pulse dialling
mode (not available in
New Zealand)
Set the telephone line
compatibility