Fujitsu PRIMERGY RX300 S8 Ficha de datos - Página 4

Navegue en línea o descargue pdf Ficha de datos para Servidor Fujitsu PRIMERGY RX300 S8. Fujitsu PRIMERGY RX300 S8 12 páginas. System configurator and order information guide
También para Fujitsu PRIMERGY RX300 S8: Manual de instrucciones (31 páginas)

Fujitsu PRIMERGY RX300 S8 Ficha de datos
Data Sheet
FUJITSU Server PRIMERGY RX300 S8 Dual socket 2U rack server
Memory notes
Memory options
Memory options
Interfaces
USB 2.0 ports
Graphics (15-pin)
Serial 1 (9-pin)
LAN / Ethernet
Management LAN (RJ45)
Onboard or integrated Controller
RAID controller
SATA Controller
LAN Controller
Remote Management Controller
Trusted Platform Module (TPM)
Slots
PCI-Express 3.0 x8
PCI-Express 3.0 x16
Slot Notes
Drive bays
Storage drive bays
Accessible drive bays
Notes accessible drives
Drive bays (Base unit specific)
Storage drive bays
Optional accessible drives
Page 4 / 11
Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory modules/
CPU with single or dual-rank RDIMM or single, dual-rank or quad-rank Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM, single rank
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM, single rank
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1,866 MHz, PC3-14900, DIMM, dual rank
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1,866 MHz, PC3-14900, DIMM, dual rank
32 GB (1 module(s) 32 GB) DDR3 LV, registered, ECC, 1,600 MHz, PC3-12800, DIMM, quad rank
64 GB (1 module(s) 64 GB) DDR3 LR, registered, ECC, 1,333 MHz, PC3-10600, DIMM, octo rank
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
10 x USB 2.0 (2x front, 4x rear, 2x internal for backup devices, 1x USB stick, 1x uSSD)
2 x VGA (thereof 1x front optional)
1 x serial RS-232-C, usable for iRMC or system or shared
2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s (SFP+)
1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port
or optional Modular LAN 2x10 Gbit controller
Front Service LAN port as option
4 port for internal 3G SATA and SAS (as upgrade option with SAS enabling key) for HDDs with RAID 0/1/10 or SAS LTO
device (Intel C600)
additional RAID controller options are described under Components RAID controller
Intel® C600, 1 x SATA channel for ODD
Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless)
Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Infineon / separate module; TCG V1.2 compliant (option)
5 x Low profile
2 x Low profile (2nd processor required)
One PCIe Gen3 x8 slot may be occupied with a Modular integrated on-board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured.
Important: 5 PCIe x8 slots are supported with the first processor. 7 PCIe slots (including 2 PCIe x16) are supported with
two processors.
Possible slot length described in relevant system onfigurator.
2.5-inch base unit (max. 16 x 2.5) or 3.5-inch base unit (max. 6 x 3.5)
1 x 5.25/0.5-inch for ODD
1 x 5.25/0.5-inch for Local Service Display
1 x 3.5/1.6-inch for backup devices
1 x 5.25/1.6-inch for backup devices
All possible options described in relevant system configurator.
Max 6 x 3.5-inch
Max 8 x 2.5-inch
1x 3.5/1.6-inch bay for
backup devices (occupies 2x
3.5-inch HDD)
Max 12 x 2.5-inch
Max 16 x 2.5-inch
LTO 5.25" or DAT/RDX 3.5"
possible
www.fujitsu.com/fts