Fujitsu PRIMERGY RX300 S8 Manual de instrucciones - Página 21
Navegue en línea o descargue pdf Manual de instrucciones para Servidor Fujitsu PRIMERGY RX300 S8. Fujitsu PRIMERGY RX300 S8 31 páginas. System configurator and order information guide
También para Fujitsu PRIMERGY RX300 S8: Ficha de datos (12 páginas)
Imprimir página
K
VII
Section
On board SATA Controller with 3 Gb/sec and up to 4x 2.5" SATA HDDs (no additional controller required)
For up to 4x 2.5" SAS HDDs with RAID 0/1 functionality a Patsburg Upgrade Kit is required
For all other HDD configurations a modular RAID-controller is required
Following optional onboard SAS RAID can be selected for 4x2.5" HDDs or one SAS Tape device
S26361-F3674-E1
Onboard 4 port SAS Controller
LSI
Patsburg B
RAID 0, 1 & 10
no controller cache
SAS 1.0 (3Gb/sec)
4 internal ports
PCIe x4
no PCI slot required
max. 1x per system
For more than 4 hard disks or 6 Gb/sec one of the following modular RAID-controllers is required
S26361-F3554-E8
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2008
LSI MegaRAID
no Cache, no BBU
RAID 0, 1 & 10
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
1x
S26361-F3669-L670
RAID Advanced Software Options
License Activation Key
for CacheCade 2.0 and FastPath
for 1 RAID Ctrl S26361-F3669-xx
L
Modular Raid 0/1, Raid5 for SAS or SATA HD`s. On-board Controller for max. 4x 2.5" SATA or SAS HD`s
Modular Raid 0/1 controller with IME support for SAS/SATA
This RAID controller supports max. 8 HDDs on internal SAS ports
Modular Raid 5 controller for SAS/SATA
RAID levels 0, 1, 10, 5, 50, 6 and 60
are supported.
This RAID controller supports max. 16 HDDs
combined with internal SAS expander
S26361-F3554-E512
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2108
LSI MegaRAID
512MB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional BBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3257-E216
Cache Battery Backup Unit
with 16 cm cable set
max. 1x per Controller
Lose delivery options
S26361-F3669-L100
TFM Module for FBU option
max. 1x per Controller
S26361-F3669-L110
Flash Backup Unit
with 25cm, 55cm, 70cm cable set
max. 1x per Controller
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S8
The FBU is an option for the controller
which can be used once per controller.
If the FBU option has been choosen, the
TFM Module is needed once per FBU.
S26361-F3669-E4
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2208
LSI MegaRAID
1GB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional FBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe 3.0 x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3669-E670
RAID Advanced Software Options
License Activation Key
for CacheCade 2.0 and FastPath
for 1 Controller
S26361-F3669-E100
TFM Module for FBU option
(flash and FBU control logic)
max. 1x per Controller
S26361-F3669-E125
Flash Backup Unit
with 25cm cable set
max. 1x per Controller
Status 2017-02-28
21 of 31