Brother fax1815c Manual de servicio - Página 3

Navegue en línea o descargue pdf Manual de servicio para Fax Brother fax1815c. Brother fax1815c 13 páginas.

Imprimir página

CHAPTER 7

MAINTENANCE MODE

Describes the maintenance mode which is exclusively designed for the purpose of checks, settings

and adjustments using the keys on the control panel.

In the maintenance mode, you can update memory (EEPROM: electrically erasable programmable

read-only memory) contents for optimizing the drive conditions of the print head unit, paper feed

roller or paper ejection roller (if they have been replaced) or for setting the CIS scanner area, for

example. You can also customize the EEPROM according to the shipment destination of the

machine concerned. In addition, you can perform operational checks of the LCD, control panel PCB

or sensors, perform a print test, display the log information or error codes, and modify firmware

switches (WSW).

CHAPTER 8

ERROR INDICATION AND TROUBLESHOOTING

Details error messages and codes that the incorporated self-diagnostic functions display if any error

or malfunction occurs. If any error message appears, refer to this chapter to find which components

should be checked or replaced.

The latter half of this chapter provides sample problems that could occur in the main sections of the

machine and related troubleshooting procedures. This will help service personnel pinpoint and repair

defective components.

Appendix 1

Serial Numbering System

Shows the location of serial number labels put on some parts and lists the coding information

pertaining to the serial numbers.

Appendix 2

Firmware Installation

Provides instructions on how to update firmware stored in the flash ROM on the main PCB of the

facsimile machine from the host PC. No hardware replacement is required for updating.

Control programs of the facsimile machine are stored in the flash ROM on the main PCB. The

updating procedure is required also if the main PCB has been replaced since a new PCB supplied

has no firmware installed.

Appendix 3

Customizing Codes According to Shipping Destination

Lists the customizing codes for the various preferences exclusively designed for each destination (e.g.

language). Those codes are stored in the memory (EEPROM) mounted on the driver PCB. If the

driver PCB is replaced with a new one, therefore, you will need to set the proper customizing codes

with the machine in the maintenance mode.

Appendix 4

Firmware Switches (WSW)

Describes the functions of the firmware switches, which may be divided into two groups: one is for

customizing preferences designed for the shipping destination (as described in Appendix 3) and the

other is for modifying preferences that match the machine to the environmental conditions. Use the

latter group if the machine malfunctions due to mismatching.

Appendix 5

Wiring Diagrams

Provides the wiring diagrams that help you understand the connections between PCBs.

Appendix 6

Circuit Diagrams

Provides the circuit diagrams of the MJ PCB (MFC3320CN), NCU PCB (MFC3220C/

FAX1920CN/FAX1820C/FAX1815C) and power supply PCB.

This manual describes the models and their versions destined for major countries. The specifications and

functions are subject to change depending upon each destination.