Fujitsu PRIMERGY TX120 S2 Manual del suplemento de servicio - Página 28

Navegue en línea o descargue pdf Manual del suplemento de servicio para Servidor Fujitsu PRIMERGY TX120 S2. Fujitsu PRIMERGY TX120 S2 38 páginas.

Replacing the processor

Ê Lock the backplane by shutting the green clamp.

Ê Reinstall the hot-plug hard disk modules (for a detailed description see the

Operating Manual).

Ê Put the drive cage on the guide rails at the expansion box.

Ê Carefully push the drive cage backwards, until the side lock engages.

Ê Connect all cables with the backplane.

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

4.5

Replacing the processor

CAUTION!

Processors are modules which are extremely sensitive to electrostatic

discharges and therefore must always be handled with care. After a

processor has been removed from its protective sleeve or from its

socket, place it with its smooth side down on a non-conducting, antistatic

surface. Never push a processor over a surface.

Ê Open the server as described in the

Ê Remove the crosspiece and the air duct as described in the

ration" on page 17

ff.

Service Supplement

Replacement routines

section "Preparation" on page 17

ff.

section "Prepa-

TX120 S2