Fujitsu SPARC Enterprise M5000 Notas sobre el producto - Página 28
Navegue en línea o descargue pdf Notas sobre el producto para Servidor Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 44 páginas. Rci build procedure
También para Fujitsu SPARC Enterprise M5000: Características Manual (30 páginas), Manual complementario (36 páginas), Manual de introducción (4 páginas)
Imprimir página
XCP Issues and Workarounds (Continued)
TABLE 6
ID
Description
RTIF1-
Using the XSCF Web, when you selected COD,
071116-003
codusage details cannot be displayed correctly.
RTIF1-
When Internet Explorer 7 browser is used, the
071116-004
License key deletion cannot be executed on the
BUI COD page.
RTIF1-
An error log cannot be registered in XSCF
071129-003
when the following message is displayed on
Solaris OS by the External I/O Expansion Unit
error:
SUNW-MSG-ID: SUN4-8000-4P, TYPE:
Fault
RTIF1-
The following messages are displayed and you
071129-004
might not boot Solaris OS:
• Abnormal OpenBoot environment
variable Boot process failed
• ERROR: Invalid token '' FATAL:
NVRAM contents corrupt;
Reinitializing NVRAM parameters.
RTIF1-
In XSCF, write of date and time may become
071227-001
an error. When the domain powered on, the
following message may appear and the
domain may fail to be powered on.
Poweron canceled due to invalid
system date and time.
RTIF1-
When the showhardconf(8) command
071227-002
executed in an environment with the External
I/O Expansion Unit, the showhardconf(8)
command may appear as if hang up.
RTIF1-
When a non-existent device name specified to
071227-003
the Boot device path and resulted in the OS
Boot error, the status of I/O unit may become
"Degraded."
18
SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • February 2008
Workaround
Use showcodusage(8) command to display
the codusage.
Use deletecodlicense(8) command to
delete a license key. Or use other browsers:
• Microsoft Internet Explorer 6.0
• Firefox 2.0 or later
• Netscape Navigator 7.1 or later
None available at this time.
Confirm the OpenBoot PROM environment
variable. If the variable has errors, set the
variable again.
Execute the rebootxscf(8) command to
restart XSCF.
Press Ctrl-C to terminate the
showhardconf(8) command and execute the
showhardconf(8) command again.
Specify the correct device name to the Boot
device path.
When the status of I/O unit became
"Degraded," replace the I/O unit.