Fujitsu SPARC Enterprise M9000 Notas sobre el producto - Página 25
Navegue en línea o descargue pdf Notas sobre el producto para Servidor Fujitsu SPARC Enterprise M9000. Fujitsu SPARC Enterprise M9000 44 páginas. For xcp version 1041
También para Fujitsu SPARC Enterprise M9000: Manual de introducción (4 páginas), Características Manual (30 páginas), Manual complementario (36 páginas)
Imprimir página
LED Error Display
The following content will be added to the SPARC Enterprise M8000/M9000 Servers
Service Manual., Section 2.6, "LED Error Display," TABLE 2-11 Status Display of LEDs
Defined Individually for Each FRU.
Status Display of LEDs Defined Individually for Each FRU
TABLE 4
FRU
LED
Type
HDD
READY
OK
CHECK
Updates of the SPARC Enterprise M8000/M9000
Servers Site Planning Guide
The following information supersedes the information in the SPARC Enterprise
M8000/M9000 Servers Site Planning Guide.
Cooling (Air-Conditioning) Requirements
This is to correct the description in the SPARC Enterprise M8000/M9000 Servers Site
Planning Guide, Section 2.3.1, "Cooling (Air-Conditioning) Requirements."
Meaning
Display
Lit (green)
Indicates that the HDD is in operation. In this state, the HDD cannot be
removed (cannot be replaced).
Blinking
Indicates that the HDD is being accessed. In this state, the HDD cannot
(green)
be removed (cannot be replaced).
Off
Indicates that the HDD can be replaced.
Lit (amber)
Indicates that an error was detected in the HDD. However, this LED
remains on for a few minutes immediately after power-on (until the
start of initialization). It does not indicate an error during that time.
Blinking
Indicates that the HDD is a replacement target.
(amber)
Off
Indicates that the HDD is in the normal state.
SPARC Enterprise M8000/M9000 Servers Product Notes
15