Fujitsu SPARC Enterprise M9000 Notas sobre el producto - Página 30
Navegue en línea o descargue pdf Notas sobre el producto para Servidor Fujitsu SPARC Enterprise M9000. Fujitsu SPARC Enterprise M9000 44 páginas. For xcp version 1041
También para Fujitsu SPARC Enterprise M9000: Manual de introducción (4 páginas), Características Manual (30 páginas), Manual complementario (36 páginas)
Imprimir página
XCP Issues and Workarounds (Continued)
TABLE 5
ID
Description
RTIF1-
Time can't be synchronized with the NTP
070904-005
server.
RTIF1-
While executing the domain power-on,
070904-006
domain reset or DR, in case the XSCF reboot
occurred, the process may be aborted in some
or all of the XSB.
RTIF1-
If an invalid SMTP server is configured, a
070912-001
subsequent attempt to disable email service
(using the setemailreport CLI) may block for
up to 30 minutes.
20
SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1041 • October 2007
Workaround
Check the stratum value of the NTP server.
The stratum value of XSCF is "5." The NTP
server which the XSCF refers to must be a
server on which the stratum value is smaller
than 5. When you changed the NTP server to
refer to, reboot the XSCF.
When the stratum value has been set correctly
and the time can't be synchronized, use the
showntp(8) command to check the jitter value
to be displayed.
If this value is large, please reboot the XSCF.
Execute the domain reset one more time, or
power off the domain and then power on
again.
Wait for the CLI to complete. The rest of the
system will function normally during this
time.
• The CLI can also be aborted by ^C. Note that
the operation (disabling emailreport) is
completed, even if ^C is used.
• showemailreport can be used to confirm
that the service has been disabled.