Fujitsu FI 6140 - Document Scanner Primeros pasos - Página 8
Navegue en línea o descargue pdf Primeros pasos para Escáner Fujitsu FI 6140 - Document Scanner. Fujitsu FI 6140 - Document Scanner 23 páginas. Image scanner
También para Fujitsu FI 6140 - Document Scanner: Manual de procedimientos de instalación (6 páginas), Especificaciones (2 páginas), Manual de introducción (20 páginas), Manual de instrucciones (10 páginas), Instrucciones de limpieza (2 páginas)
Imprimir página
■ Removable Parts
The following shows the parts that can be removed from the
scanner.
Can be
removed
Brake roller
[fi-6240/fi-6230 only]
Document cover
1.3 Operator Panel
The operator panel is located on the right side of the scanner.
This panel is comprised of a Function Number Display, four
buttons, and a LED.
ADF paper chute
Can be
removed
Pick roller
Check LED
Check
Function Number
Display
Function
Function button
Send to
Send to button
Scan
/Stop
Scan/Stop button
Power
Power button/LED
Name
Function Number Display
Buttons
Function
Send to
Scan/Stop
Power
LED
Check
Power
*) About the settings on the launcher, refer to FUJITSU
TWAIN32 scanner driver help and the "fi-6140/fi-6240/
fi-6130/fi-6230 Operator's Guide" in the Setup CD-ROM.
■ Indications on the Function
Number Display
Indication
8
Lights only one time upon turning on the
scanner.
P
Indicates that the scanner has been turned
ON and is being initialized.
0
Indicates that initialization will soon be
completed.
1
Indicates that initialization has been
completed successfully.
This status is called "Ready Status."
J
Indicates that a recoverable error occurred
during scanning with the image scanner.
U
"U" or "J" and an "error number" is
displayed alternately. When an error is
indicated, press the [Scan] or [Send to]
button to return to the Ready Status ("1").
E
Indicates that an abnormality (alarm)
occurred in the image scanner during its
F
initialization or during scanning.
C
"E", "F", "C", "H", "A", or "L" and an
H
"alarm number" is displayed alternately.
A
When the alarm number is displayed, press
L
the [Scan] or [Send to] button to return to
the Ready Status.
When an alarm is indicated, turn off the
scanner once, and then turn it on. If the
alarm persists, contact your service
engineer, the store where you purchased
the scanner, or an authorized service
provider.
2
Function
Indicates the Function
Number and error status.
For details, refer to
"Indications on the Function
Number Display" below.
Changes the Function
activated by the Send to
button (*).
Launches the linked application
•
software (*).
Resets an error.
•
•
Launches a linked application
software.
Resets an error.
•
•
Cancels ongoing scanning.
Turns on and off the scanner.
Blinks to indicates an error.
Stays illuminated when the
scanner is turned on.
Descriptions