Brother MFC-820CW Manual de configuración rápida - Página 13
Navegue en línea o descargue pdf Manual de configuración rápida para Fax Brother MFC-820CW. Brother MFC-820CW 45 páginas. Quick setup guide - english
También para Brother MFC-820CW: Manual de configuración rápida (45 páginas), Manual de servicio (11 páginas)
Imprimir página
9
Setting the phone line type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
also necessary to change the phone line type
accordingly by completing the following steps.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Phone Line Set.
Press OK.
4
Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
5
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Automatic Branch Exchange (PBX). Your machine
can be connected to most types of PABX. The
machine's recall feature supports timed break recall
only (TBR). TBR will work with most PABX systems
allowing you to gain access to an outside line or send
calls to another extension. The feature works when
the Tel/R key is pressed.
Note
You can program a Tel/R key press as part of a
number stored in a Speed-Dial location. When
programming the Speed-Dial number, press Tel/R
first (the LCD shows '!'), then enter the telephone
number. If you do this, you do not need to press
Tel/R each time before you dial using a
Speed-Dial location.
(See Storing numbers for easy dialling on the
User's Guide.)
Setting Up the Machine
10
Choosing a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Are you connecting an external telephone or external
telephone answering device to your machine?
Yes
Are you using the voice message function of
your external telephone answering device?
No
Do you want your machine to answer
every call?
Yes
Do you use your machine for faxes
only?
Yes
No
No
Yes
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Receive Mode.
Press OK.
4
Press a or b to choose the mode.
Press OK.
5
Press Stop/Exit.
For details, see Receiving a Fax in Chapter 6
of the User's Guide.
Now go to
Go to Supplied CD-ROM 'MFL-Pro Suite' on
the next page to install the drivers.
No
Fax Only
Your machine
automatically answers
every call as a fax.
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
Manual
You control the phone
line and must answer
every call yourself.
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored on
the external TAD. Fax
messages are printed.
11