Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Procedimiento de instalación

Navegue en línea o descargue pdf Procedimiento de instalación para Escáner Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf. Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf 5 páginas. Image scanner
También para Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf: Manual de procedimientos de instalación (7 páginas), Manual de procedimientos de instalación (9 páginas), Folleto (2 páginas), Procedimientos de instalación (3 páginas), Procedimientos de instalación (3 páginas), Procedimientos de instalación (3 páginas), Folleto y especificaciones (2 páginas), Folleto y especificaciones (2 páginas), Catálogo ilustrado de piezas de recambio (22 páginas)

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Procedimiento de instalación
M3093GX\DG\M3096G\GX\M3097G+\DG
Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI
Step A: Required hardware.
To install these models you will need a Narrow SCSI 50-pin controller and six foot (maximum)
Narrow SCSI cable.
Step B: Removing the shipping bracket.
It is recommended that before you connect the scanner to your computer that you inspect the
scanner and remove the shipping bracket first.
Removing the shipping bracket: The flatbed scanner models typically come with a
factory installed shipping lock designed to protect the scanner during shipment. Before
the scanner can be used the shipping lock must be unlocked. Follow these instructions
to unlock the shipping bracket:
1. Slide the scanner to its side as shown in figure below.
2. Unscrew the retainer screw and remove the shipping bracket.
3. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure below)
Place scanner back in its normal position
4.
Win95\98\ME Installation Procedure
Rev052104A