Brother DCP-6690CW Manual de configuración rápida - Página 24

Navegue en línea o descargue pdf Manual de configuración rápida para Servidor de impresión Brother DCP-6690CW. Brother DCP-6690CW 43 páginas.

For Wireless Network Users

For Wireless Network Interface Users

First you must configure the wireless network settings of your machine to communicate with your network access

point (router). After the machine is configured to communicate with your access point (router) computers on your

network will have access to the machine. To use the machine from these computers, you will need to install the

drivers and software. The following steps will guide you through the configuration and installation process.

To achieve optimum results with normal everyday document printing, place the Brother machine as close to the

network access point (router) as possible with minimal obstructions. Large objects and walls between the two

devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Although the Brother DCP-6690CW can be used in a both wired and wireless network, only one of the connection

methods can be used at a time.

Important

If you have previously configured the wireless settings of the machine you must reset the network

(LAN) settings before you can configure the wireless settings again.

On your machine, press MENU. Press a or b to display Network and press Network.

Press a or b to display Factory Reset, and then press Factory Reset.

Press Yes to accept. Hold down Yes for 2 seconds to confirm.

Note

The following instructions are for infrastructure mode.

To set up your machine in any other wireless environment you can find instructions in the Network User's

Guide on the CD-ROM.

You can view the Network User's Guide by following the instructions below.

1 Turn on your computer/Macintosh

For Windows

2 Choose your model and the language. The CD-ROM main menu will appear.

3 Click Documentation, and then click HTML documents.

For Macintosh

2 Double-click Documentation, and then double-click your language folder.

3 Double-click top.html.

Infrastructure Mode

Access Point (router)

Wireless Network machine (your machine)

Wireless capable computer connected to the access point

Wired computer connected to the access point

. Insert the Brother CD-ROM into your CD-ROM drive.