Fujitsu S500M - ScanSnap - Document Scanner Primeros pasos - Página 9
Navegue en línea o descargue pdf Primeros pasos para Escáner Fujitsu S500M - ScanSnap - Document Scanner. Fujitsu S500M - ScanSnap - Document Scanner 24 páginas. Color image scanner for macintosh
También para Fujitsu S500M - ScanSnap - Document Scanner: Procedimientos de instalación (3 páginas), Folleto y especificaciones (2 páginas)
Imprimir página
2. Double-click the ScanSnap icon.
The "Welcome to the ScanSnap Manager Installer"
window appears and the installation of ScanSnap
Manager starts.
3. Follow the instructions to install the software.
4. After the installation is complete, eject the CD-ROM
from the CD-ROM drive.
Refer to the "ScanScnap Operator's Guide"
ATTENTION
(Manual.pdf) in ScanSnap Setup CD-ROM to learn
more about ScanSnap Manager.
2.2. Connecting the Scanner
2.2.1. Connecting the AC cable
Do not use cables other than the ones supplied
ATTENTION
with this product. Use only the specified AC cables
and AC adapter.
1. Connect the AC cable to the AC adapter.
2. Insert the connectors of the AC adapter to the scanner
inlet, and then plug the cord in a power outlet.
Inlet
2.2.2. Connecting the USB cable
Follow the procedures below to connect the USB cable.
ATTENTION
1. Remove the seal from the USB connector.
2. Connect the scanner and your computer with the USB
cable.
3. Open the Paper chute of the scanner.
ATTENTION
Your computer will automatically detect the scanner.
The installation of ScanSnap is complete!
ATTENTION
Outlet
HINT
ScanSnap S500M for Macintosh Getting Started | 7
●
Use the USB cable supplied with this scanner.
The operation with a commercially available
USB cable is not guaranteed.
●
When connecting to a USB hub, be sure to
connect the scanner to the hub nearest to your
computer (first stage). If you connect it to a USB
hub from the second stage onwards, ScanSnap
may not operate correctly.
USB cable
If the scanner does not turn on automatically,
press the [POWER] button on the scanner.
The "ScanSnap Manager" icon
below the icon appears in the Dock menu.
When the icon remains inactive
[POWER] button to turn off the scanner, and then
press the [POWER] button again to restart the
scanner. (Allow at least 5 seconds when you turn
on/off the scanner.)
When using the [POWER] button to turn off/on the
scanner, press it for longer than one second.
* To prevent miss-operation, the [POWER] button
does not work unless it is pressed for longer than
one second.
with a triangle
, press the