Fujitsu ScanSnap FI-4110EOX2 Manual de introducción - Página 17
Navegue en línea o descargue pdf Manual de introducción para Escáner Fujitsu ScanSnap FI-4110EOX2. Fujitsu ScanSnap FI-4110EOX2 18 páginas. Color image scanner
También para Fujitsu ScanSnap FI-4110EOX2: Procedimientos de instalación (2 páginas), Especificaciones (2 páginas)
Imprimir página
Pad ASSY
Clean the Pad ASSY top down (in the direction of
the arrow). When cleaning the Pad ASSY, take care
to prevent the cloth from catching on the pick arm
or pick spring.
ADF glass surface
Clean lightly.
Pick roller
Clean lightly taking care not to scratch the surface
of the roller. Take particular care in cleaning the
Pick roller, as black debris on the roller adversely
affects pickup performance.
Feed rollers
Clean lightly taking care not to roughen the surface
of the rollers. Take particular care in cleaning the
feed rollers, as black debris on the rollers adversely
affects pickup performance.
Plastic rollers
Clean lightly taking care not to roughen the surface
of the rollers. Take particular care in cleaning the
plastic rollers, as black debris on the rollers
adversely affects pickup performance.
Exit rollers
Clean lightly taking care not to roughen the surface
of the rollers.
Take particular care in cleaning the exit rollers, as
black debris on the rollers adversely affects pickup
performance.
Connect the AC adapter and AC cable.
Rotate the exit rollers a little bit at a time by
pressing the two buttons simultaneously. (As a
guideline, 15 presses of the buttons rotate the exit
roller one full turn.)
Connect the AC adapter and AC cable
ATTENTION
only when cleaning the discharge
rollers.
Paper guide surface (white part)
Clean lightly.
3.
Push in the center of the ADF to return it to its
original position.
Push in center.
When the ADF has returned to its original
ATTENTION
position, make sure that it is completely
closed. Paper jams or defective scanning
may occur if the ADF is not completely
closed.
ScanSnap! fi-4110EOX2 Getting Started | 15