Brother HL-2270DW Manual de configuración rápida - Página 27

Navegue en línea o descargue pdf Manual de configuración rápida para Servidor de impresión Brother HL-2270DW. Brother HL-2270DW 36 páginas. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
También para Brother HL-2270DW: Manual del usuario de la red (47 páginas), Manual de configuración rápida (36 páginas), Manual de instalación (5 páginas), Manual de configuración rápida (35 páginas), Preguntas frecuentes y resolución de problemas (6 páginas)

Wireless Network

(For USB cable users)

Disconnect the USB cable between the

computer and the machine.

(For LAN cable users)

Disconnect the network cable between your

access point and the machine, and click Next.

Wireless setup is completed.

Install the printer driver

IMPORTANT

DO NOT try to cancel any of the screens

during this installation.

Note

• If there is more than one of the same model

connected on your network, the MAC Address

(Ethernet Address) will be displayed after the

model name. You can also confirm your IP

Address by scrolling to the right.

• You can find your machine's MAC Address

(Ethernet Address) and the IP Address by

printing out the Printer Settings Page. See Print

the Printer Settings Page on page 31.

Follow the on-screen instructions to complete

setup.

Note

When the Brother Support screen appears,

make your selection and follow the on-screen

instructions.

The installation is now

Finish

complete.

Note

If you use a specified IP Address for the machine,

you must set the Boot Method to Static by using

the BRAdmin Light. For more information, See

Changing your machine's network settings in the

Network User's Guide.

Macintosh