Brother HL-3450CN Series Manual de configuración rápida - Página 2

Navegue en línea o descargue pdf Manual de configuración rápida para Servidor de impresión Brother HL-3450CN Series. Brother HL-3450CN Series 2 páginas. Color laser printer
También para Brother HL-3450CN Series: Manual de instalación de controladores (2 páginas), Lista de referencia de piezas (25 páginas)

Imprimir página
Brother HL-3450CN Series Manual de configuración rápida
Network Quick Setup Guide
If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to
installation.
If you are an Administrator, configure your network printer setting referring to the following instructions.
The default password for the print server is 'access'. You can use the BRAdmin Professional software or a web browser to change
this password.
Setting Your Language on the Control Panel
To change the language settings of the printer do the following.
(All references are to what you will see in the lower portion of the LCD panel.)
- - MENU - -
SETUP
SETUP
LANGUAGE
READY
K
C
M
Y
NETWORK READY
NETWORK READY
HL-3450CN
Power
Ready
Data
Alarm
Job
Go
Go
Cancel
Back
Set
Back
Secure
Print
1
Press the + button until
2
Press the Set button
Reprint
Back
Set
SETUP is displayed.
again.
Press the Set button.
Setting Your Printer IP Address and Subnet Mask
To set the printer IP address using the printer control panel do the following.
(All references are to what you will see in the lower portion of the LCD panel.)
- - MENU - -
NETWORK
NETWORK
TCP / I P
READY
K
C
M
Y
NETWORK READY
NETWORK READY
HL-3450CN
Power
Ready
Data
Alarm
Job
Go
Go
Cancel
Back
Set
Back
Secure
Print
Press the + button until
Press the Set button
1
2
Reprint
Back
Set
NETWORK is displayed.
again.
Press the Set button.
TCP/IP ENABLE will
be displayed.
TCP / I P
SUBNET MASK=
Back
Set
Press the + button until
5
SUBNET MASK= is displayed.
Press the Set button.
For more information refer to the Network User's Guide on the supplied CD-ROM or go to http://solutions.brother.com
©2001 Brother Industries, Ltd. ©1998-2001 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark
of UNIX Systems Laboratories. PostScript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple
Computer, Inc.
All other brand and product names are registered trademarks or trademarks of respective companies.
LANGUAGE
=ENGL I SH
*
Set
Back
Set
3
Scroll through the available languages by
pressing the + or - buttons. Press the Set
button to accept the appropriate language.
An asterisk mark (*) appears on the LCD.
(Using the Control Panel)
TCP / I P
I P ADDRESS=
Set
Back
Set
Press the + button until
Enter your IP address of the printer using
3
4
IP ADDRESS= is
the + and - buttons. Press the Set button
displayed.
to go to next digit. Press the Set button
Press the Set button.
to complete the IP address.
An asterisk mark (*) appears on the LCD.
SUBNET MASK=
READY
0
.
0 .
0 .
0
*
Back
Set
Enter your subnet mask settings in the
7
Press the Go button to put the printer
6
same way that you entered the IP address.
back into its READY state.
An asterisk mark (*) appears on the LCD.
For the Administrator
Install the BRAdmin Professional Configuration utility
The BRAdmin Professional software is designed to manage your Brother network connected devices. For example, Brother network
ready printers and Brother network ready Multifunction devices can be managed using the BRAdmin Professional software. The
BRAdmin Professional software can also be used to manage devices from other manufacturers whose products support the SNMP
(Simple Network Management Protocol).
For more information on the BRAdmin Professional utility go to http://solutions.brother.com
READY
Insert the CD-ROM into your CD-ROM drive.
1
The opening screen will appear automatically.
Follow the instructions on the screen.
Ready
Network User's Guide Chapter Map
Go
To configure the print server refer to the Network User's Guide.
4
Press the Go button to put
the printer back into its
READY state.
Windows
®
95/98/Me
Windows NT
®
I P ADDRESS=
1 9
2
.
0 .
0 . 1 9 2
*
Windows
®
2000/XP
Back
Set
UNIX/Linux
Macintosh
®
OS2 Warp Server
LAN Server
Ready
Print Configuration Page
Go
To print a configuration page, use a fine ball point pen to hold down the
Network Test Button for less than 5 seconds.
Factory Default Setting
If you wish to reset the print server back to its default factory settings
(resetting all information such as the password and IP address information),
use a fine ball point pen to hold down the Network Test Button for more
than 5 seconds.
(For Windows
®
Users Only)
Click the Install Software icon
2
on the Menu screen.
®
®
Windows
Macintosh
Peer-to-Peer
TCP/IP
Chapter 3
NetBIOS
Chapter 4
Brother Internet Print
TCP/IP
Chapter 5
Netware
IPX/SPX
Chapter 6
Peer-to-Peer
TCP/IP
Chapter 2
NetBIOS
Chapter 4
DLC/LLC
Chapter 8
Brother Internet Print (NT
®
4.0 only)
TCP/IP
Chapter 5
Netware
IPX/SPX
Chapter 6
Peer-to-Peer
TCP/IP
Chapter 2
NetBIOS
Chapter 4
(Windows
®
2000 only)
DLC/LLC
Chapter 8
IPP (Internet Printing Protocol)
TCP/IP
Chapter 2
Brother Internet Print
TCP/IP
Chapter 5
Netware
IPX/SPX
Chapter 6
TCP/IP
Chapter 1
AppleTalk
Chapter 7
TCP/IP
Chapter 7
TCP/IP
Chapter 2
NetBIOS
Chapter 4
Click "BRAdmin Professional."
3
Follow the instructions on the screen.
Peer-to-Peer Printing
NetBIOS Peer-to-Peer Printing
How to Configure Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
DLC Printing
How to Configure Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
DLC Printing
TCP/IP Printing
How to Configure Internet Printing
Novell Netware Printing
UNIX Printing
Macintosh Printing
Macintosh Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
Test Button