Fujitsu ETERNUS DSP Series Manual de referencia Cli - Página 6
Navegue en línea o descargue pdf Manual de referencia Cli para Almacenamiento Fujitsu ETERNUS DSP Series. Fujitsu ETERNUS DSP Series 30 páginas.
Imprimir página
1.
CLI Overview
Using the CLI
Displaying DSP Node Physical Interfaces
1
To display the IP addresses of all physical interfaces on the DSP node, issue the following com-
mand:
datera-net interface list --iface=all
2
To display the IP address of a specific physical interface on the DSP node, issue the following
command:
datera-net interface list --iface=ipmi|mgt1|mgt2|netA1|netA2|netB1|netB2
Displaying CLI Help
1
To display a list and short description of all CLI commands, issue the help command.
Local >> help
2
To display the detailed Help for a specific CLI command, use the --help or -h command. For
example:
Local >> datera-net --help
3
Some commands include additional Help for specific subcommands. For example:
Local >> datera-net interface -h
Logging out of the CLI
To log out of the CLI, enter the exit or the quit command:
Local >> exit | quit
The Ctrl-D command also exits the CLI.
6
ETERNUS DSP CLI Reference Guide