Fujitsu ETERNUS DX Disk Manual de configuración - Página 21

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 32 páginas. Server connection, fcoe for linux driver settings for converged network adapter cards
También para Fujitsu ETERNUS DX Disk: Manual del usuario (35 páginas), Manual del usuario (42 páginas), Manual de configuración (28 páginas), Manual de configuración (44 páginas), Manual de configuración (28 páginas), Manual de configuración (29 páginas), Manual de configuración (25 páginas), Manual de configuración (35 páginas), Manual de configuración (31 páginas), Manual de configuración (43 páginas), Manual de configuración (21 páginas), Manual de configuración (24 páginas)

Chapter 8

Setting Up XenServer

8.1

Setting Up the Fibre Channel Cards

8.1.3

For Fujitsu QLogic Fibre Channel Cards

This section explains how to install QLogic Fibre Channel cards in the XenServer host and how to connect the

ETERNUS DX/AF.

For the installation procedure and functions regarding XenCenter, refer to the manuals that can be obtained

on the following Citrix web-site:

https://www.citrix.com/support/

Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do

not need to be installed.

Use the following procedure to set the drive parameters.

Use the SANsurfer FC HBA CLI or the QConvergeConsole CLI to set the driver parameters. The SANsurfer

•

FC HBA CLI or the QConvergeConsole CLI is installed in XenServer as standard.

For details on how to use the SANsurfer FC HBA CLI or the QConvergeConsole CLI, refer to the command

help.

Set the parameters without the ETERNUS DX/AF connected.

•

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

XenServer

P3AM-4572-19ENZ0