Fujitsu Eternus DX200F Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Almacenamiento Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 10 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
También para Fujitsu Eternus DX200F: Manual de instrucciones (48 páginas), Manual de configuración (28 páginas), Manual de configuración (13 páginas), Manual de configuración (16 páginas), Manual de configuración (38 páginas), Precauciones de seguridad (12 páginas)

Initial Setup

Perform the settings that are required before operation of the ETERNUS DX on the Initial Setup screen.

Perform the following settings according to the wizard

screen:

●

Set Storage System Name

●

Change User Password

●

Set Thin Provisioning

●

Setup Network Environment

In the Setup Network Environment settings, set the

IP address of the MNT port to connect the ETERNUS DX

to the operation management LAN.

After the settings are complete, close the Web browser.

Establishing a Connection between the ETERNUS DX and the Operation Management LAN

Remove the LAN cable between the RMT port on Controller 0 and the PC terminal.

Connect the LAN cables of the MNT ports on Controller 0 and Controller 1 to the network of the customer.

Then start the web browser from the PC terminal that is connected to the network and log in to ETERNUS Web GUI

again with the IP address that is set in "Set Network Environment". After login, the Overview screen appears.

Set the firewall for each service.

Click the [System] tab, click [Network] in [Category],

and then click [Setup Firewall] in [Action].

Enable or disable each service. Make sure to disable

the ETERNUS DX Discovery function.

If the network environment is not set up,

IMPORTANT

the ETERNUS DX Discovery function is

enabled. Some functions are not available

when the ETERNUS DX Discovery function

is enabled for the MNT port. Make sure

to set up the network environment

and disable the ETERNUS DX Discovery

function.

FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide

P3AM-8482-01ENZ0