Fujitsu ETERNUS DX60 Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Fujitsu ETERNUS DX60. Fujitsu ETERNUS DX60 42 páginas. Disk storage system
También para Fujitsu ETERNUS DX60: Manual de instalación (4 páginas), Manual del usuario (35 páginas), Manual de instalación (4 páginas), Uso de productos opcionales (2 páginas), Manual de configuración (28 páginas), Manual de configuración (16 páginas), Uso de productos opcionales (2 páginas), Presentación del producto (19 páginas), Contenido del paquete (4 páginas), Manual (4 páginas)

Imprimir página
Fujitsu ETERNUS DX60 Manual del usuario
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
6.1.5

Enabling ALUA

This procedure is only required when VMware vSphere contains VMware ESX 4.0/VMware ESXi 4.0.
It does not need to be performed when VMware vSphere contains VMware ESX 4.0 Update 1/VMware ESXi
4.0 Update 1 or later versions.
In this case, proceed to
After the VMware ESX server has been installed, Asymmetric Logical Unit Access (ALUA) should be enabled
according to the following procedure.
1
Use the terminal to log in to VMware ESX as "root".
2
Execute the following command in the terminal:
•
When connecting to an ETERNUS DX60/DX60 S2, DX80/DX80 S2, or DX90 S2
esxcli nmp satp addrule --satp="VMW_SATP_ALUA" --vendor="FUJITSU" --
model="ETERNUS_DXL" --description="ETERNUS DX with ALUA" --claim-option
tpgs_on
•
When connecting to an ETERNUS DX400/DX400 S2 series
esxcli nmp satp addrule --satp="VMW_SATP_ALUA" --vendor="FUJITSU" --
model="ETERNUS_DX400" --description="ETERNUS DX400 with ALUA" --
claim-option tpgs_on
When connecting to an ETERNUS DX8000/DX8000 S2 series
•
esxcli nmp satp addrule --satp="VMW_SATP_ALUA" --vendor="FUJITSU" --
model="ETERNUS_DX8000" --description="ETERNUS DX8000 with ALUA"
--claim-option tpgs_on
3
Execute the following command in the terminal:
esxcli corestorage claiming unclaim --type location
Ignore the following error message if it appears when the preceding command is executed:
Errors:
Unable to perform unclaim. Error message was : Unable to
unclaim paths. Busy or in use devices detected. See
VMkernel logs for more information.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
"6.1.6 Checking the LUNs " (page
25
Copyright 2013 FUJITSU LIMITED
27).
®
ESX
P3AM-3412-13ENZ0