Fujitsu Eternus DX80 S2 Manual - Página 13

Navegue en línea o descargue pdf Manual para Almacenamiento Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 18 páginas. Server connection. (fibre channel) for aix
También para Fujitsu Eternus DX80 S2: Manual del usuario (35 páginas), Manual del usuario (42 páginas), Instalación (20 páginas), Manual de configuración Conexión al servidor (13 páginas), Instalación del hardware (23 páginas), Manual de configuración (28 páginas), Manual de configuración (15 páginas), Manual de configuración (38 páginas)

ETERNUS Web GUI Startup

Open the Web browser on the PC terminal.

Enter either of the following URLs in the address bar

of the Web browser.

http://192.168.1.1/

The login screen for ETERNUS Web GUI appears.

To change the user interface language, click the

[Option] button and select "English" or "Japanese" in

"Language".

Enter the Username and Password.

User name: root

Password: root (by default)

After logging in, the Initial Settings screen of ETERNUS

Web GUI appears.

-Installation- "5.1.3 ETERNUS Web GUI Startup"

Initial Setup

Perform the settings that are required before operation of the ETERNUS DX Disk storage system on the initial setup

screen.

Perform the following settings according to the wizard

screen:

Set Storage Name

●

Set Date and Time

●

Change Password

●

Set Network Environment

●

After the settings are complete, close the Web browser and then remove the LAN cable (for operation management)

from the PC terminal. Connect LAN cables (for operation management) to the customer network from the MNT ports

on both controller 0 and controller 1.

Then start the web browser from the PC terminal that is connected to the network and log in to ETERNUS Web GUI

again with the IP address that is set in "Set Network Environment". After login, the Overview screen appears.

-Installation- "5.1.4 Initial Setup"

ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First

P3AM-4872-11EN