Fujitsu ETERNUS DX8100 S2 Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Fujitsu ETERNUS DX8100 S2. Fujitsu ETERNUS DX8100 S2 42 páginas. Disk storage system settings
También para Fujitsu ETERNUS DX8100 S2: Manual del usuario (35 páginas), Manual de configuración (28 páginas), Manual de configuración (15 páginas)
Imprimir página
Chapter 3
Notes
Note the following issues when connecting the ETERNUS DX Disk storage system to a server.
3.1
Connection Notes
3.1.1
For VMware vSphere
Dedicated IP addresses must be allocated to the iSCSI LAN. An IP address must be allocated to each VMkernel
that corresponds to an iSCSI Initiator, and a LAN card and VMkernel must be connected via a virtual switch.
●
For the ETERNUS DX Disk storage system
For example, a total of four IP addresses are required by the following iSCSI connection setup.
Example connection configuration
VMkernel (iSCSI Software Initiator)
IP address (1)
IP address
for iSCSI port (3)
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
VMware ESX server
LAN card
LAN switch
ETERNUS DX Disk storage system
Copyright 2013 FUJITSU LIMITED
VMkernel (iSCSI Software Initiator)
IP address (2)
LAN card
LAN switch
IP address
for iSCSI port (4)
12
®
ESX
P3AM-3412-13ENZ0