Fujitsu ETERNUS DX8100 S2 Manual del usuario - Página 24
Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Fujitsu ETERNUS DX8100 S2. Fujitsu ETERNUS DX8100 S2 42 páginas. Disk storage system settings
También para Fujitsu ETERNUS DX8100 S2: Manual del usuario (35 páginas), Manual de configuración (28 páginas), Manual de configuración (15 páginas)
Imprimir página
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
5
Confirm that the [Enabled] checkbox is selected under "Status" on the [General] tab and click [Config-
ure] again.
6
Confirm that the iSCSI name is displayed in the "iSCSI Name" column and click the [Cancel] button.
7
Select the [Dynamic Discovery] tab and click the [Add] button.
8
Enter the IP address for the iSCSI port of the connected ETERNUS DX Disk storage system as the iSCSI
server IP address, confirm that the port is set to "Port 3260" (default), and click the [OK] button.
9
Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as
follows.
10
If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-
tion process for each iSCSI port. (Repeat
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
Step 7
through
Step
24
Copyright 2013 FUJITSU LIMITED
9.)
®
ESX
P3AM-3412-13ENZ0