Fujitsu Eternus DX90 S2 Manual de configuración - Página 8

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 38 páginas. Server connection. (fibre channel) for aix
También para Fujitsu Eternus DX90 S2: Manual del usuario (35 páginas), Manual del usuario (42 páginas), Manual (18 páginas), Instalación (20 páginas), Manual de configuración Conexión al servidor (13 páginas), Instalación del hardware (23 páginas), Manual de configuración (28 páginas), Manual de configuración (15 páginas)

Chapter 1

Workflow

Setting Up the Fibre Channel Switches

If a Fibre Channel switch is to be used, set it up now.

"Chapter 7 Setting Up the Fibre Channel Switches" (page 19)

•

Checking the Fibre Channel switch connection requirements

•

"Server Support Matrix for FC-SWITCH"

Installing the Fibre Channel Card Drivers and Setting the Parameters

Install the Fibre Channel card drivers, and set up the server environment.

•

"8.1 Installing the Driver" (page 21)

"8.2 Setting Up the Driver Parameters" (page 21)

•

Checking the Fibre Channel card driver versions

•

"Server Support Matrix"

For the standard multipath driver or the ETERNUS

Installing the Multipath Driver

Install the ETERNUS Multipath Driver before using

it.

"8.3 Installing the Multipath Driver" (page 23)

•

Installing the Multipath Driver

•

Installation & Configuration Guide

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.

"9.2 Setting Up the Server to Recognize the Logical Units" (page 25)

•

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

Multipath Driver

For single-path connection or Veritas Volume

Manager

Installing the FJspio Package

Install the FJspio.

"8.4 Installing the FJspio Package" (page 23)

•

P3AM-3782-23ENZ0