AEG OKO-LAVAMAT BELLA2100 Manual de instrucciones - Página 42

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora AEG OKO-LAVAMAT BELLA2100. AEG OKO-LAVAMAT BELLA2100 45 páginas. Aeg the environmentally friendly washing machine

Imprimir página

Installation

Permanent connection

In the case of a permanent connection it is necessary that you install a

double pole switch between the appliance and the electricity supply

(mains), with a minimum gap of 3 mm between the switch contacts and

of a type suitable for the required load in compliance with the current

electrical regulations.

The switch must not break the yellow and green earth cable at any

point.

This operation must be performed by a qualified electrician.

Important: The power supply cable must be easily accessible after

installing the machine.

Door reversal

The opening direction of the outer door on this machine can be rever-

sed. To carry out this operation, proceed as follows:

Disengage the end of the

catch (1) from the door

and turn it 90° to

remove it from its seat

(Fig. A).

Using a screwdriver, turn

plastic plug (2) 90° to

remove it from its seat

(Fig. A).

Fit plug (2) in the hole

left free by catch (1) and

turn it 90° to lock it in

place (Fig. B).

Fit catch (1) into the

hole from which plug (2)

was removed and turn it

90°, making sure that

the latching tooth is fac-

ing towards the right

(Fig. B).

Remove the door by

unscrewing the screws

securing it to the bottom hinge (3 - Fig. A).