Fujitsu ETERNUS8000 model 700 Manual - Página 23

Navegue en línea o descargue pdf Manual para Almacenamiento Fujitsu ETERNUS8000 model 700. Fujitsu ETERNUS8000 model 700 28 páginas. Disk storage systems (fibre channel) for oracle solaris
También para Fujitsu ETERNUS8000 model 700: Manual de conexión al servidor (25 páginas), Manual de conexión al servidor (32 páginas), Manual de conexión (19 páginas)

Imprimir página

Chapter 8

8.1

Turning on the Devices

To turn on the connected devices, use the following procedures:

8.2

Logical Unit Recognition

Check the state of the ETERNUS Disk storage system LUNs (logical units) using the "format"

command.

Example: ETERNUS2000

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1

Specify disk (enter its number): Specify disk (enter its number):

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Checking Connections

Procedure

Turn on any devices (such as LAN switches) on the LAN path between the

ETERNUS Disk storage system and server.

After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on

the ETERNUS Disk storage systems.

After checking that the ETERNUS Disk storage systems' Ready LED is lit, turn

on the server.

1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

End of procedure

Indicates connection

via "CM0"

Indicates connection

via "CM1"