Brother MFC-J270W Manual de instalación - Página 25

Navegue en línea o descargue pdf Manual de instalación para Servidor de impresión Brother MFC-J270W. Brother MFC-J270W 35 páginas. Quick setup guide - spanish
También para Brother MFC-J270W: (Spanish) Guía De Configuración Rápida (35 páginas)

Imprimir página

For Wireless Network Users

The Authentication/Encryption methods used by the selected wireless access point/router are

not supported by your machine.

For infrastructure mode, change the authentication and encryption methods of the wireless

access point/router.

Your machine supports the following authentication methods:

authentication method

WPA-Personal

WPA2-Personal

TS-04

Shared key

If your problem is not solved, the SSID or network settings you entered may be incorrect.

Reconfirm the wireless network settings.

See How can I find the wireless security information (SSID and Network Key) on page 24 to

confirm.

For ad-hoc mode, change the authentication and encryption methods of your computer for

the wireless setting.

Your machine supports Open authentication method only, with optional WEP encryption.

The security information (SSID/Network Key) is incorrect.

Reconfirm the SSID and security information (Network Key).

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

TS-05

machine supports the use of the first WEP key only.

See How can I find the wireless security information (SSID and Network Key) on page 24 to

confirm.

The wireless security information (Authentication method/Encryption method/Network Key) is

incorrect.

Reconfirm the wireless security information (Authentication method/Encryption

method/Network Key) in the table of TS-04.

TS-06

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

See How can I find the wireless security information (SSID and Network Key) on page 24 to

confirm.

The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.

If you would like to configure your wireless settings using WPS

or AOSS™, you must operate both your machine and the

wireless access point/router.

Confirm your wireless access point/router supports WPS or

TS-07

AOSS™ and try starting again.

If you do not know how to operate your wireless access

point/router using WPS or AOSS™ see the documentation

provided with your wireless access point/router, ask the

manufacturer of your wireless access point/router or ask your

network administrator.

Two or more wireless access points that have WPS or AOSS™ enabled are detected.

- Confirm that only one wireless access point/router within range has the WPS or AOSS™

TS-08

method active and try again.

- Try starting again after a few minutes in order to avoid interference from other access

points.

encryption method

Open

None (without encryption)

TKIP

AES

WEP