Brother MFC-J415W Manual del usuario avanzado - Página 13
Navegue en línea o descargue pdf Manual del usuario avanzado para Servidor de impresión Brother MFC-J415W. Brother MFC-J415W 50 páginas. Quick setup guide - spanish
También para Brother MFC-J415W: Manual de instalación (35 páginas), Especificaciones técnicas (2 páginas), Manual de configuración rápida (33 páginas), (Spanish) Guía De Configuración Rápida (35 páginas)
Imprimir página
Changing fax resolution
The quality of a fax can be improved by
changing the fax resolution.
a
Press
(FAX).
b
Press a or b to choose
Fax Resolution.
Press OK.
c
Press a or b to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
Monochrome
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Setting your changes as a
3
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Glass ScanSize you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press a or b to choose the menu option
that you want to change and press OK.
Then press a or b to choose the new
option.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring fax settings to the
factory settings
You can restore the fax settings
Fax Resolution, Contrast,
Real Time TX, and Glass ScanSize,
that you have changed, to the factory
settings.
a
Press
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Sending a fax
(FAX).
(FAX).
3
3
3
7