Brother MFC-J4410DW Manual de configuración rápida - Página 7

Navegue en línea o descargue pdf Manual de configuración rápida para Servidor de impresión Brother MFC-J4410DW. Brother MFC-J4410DW 45 páginas. Guía de wi-fi direct
También para Brother MFC-J4410DW: Manual de configuración rápida (47 páginas), Manual (36 páginas), Manual (22 páginas), Manual de seguridad del producto (17 páginas), Manual (13 páginas), Manual (13 páginas), Manual (22 páginas), Manual de seguridad del producto (20 páginas), Manual de inicio rápido (29 páginas), Manual de seguridad del producto (25 páginas), Manual Start Here (47 páginas), (Español) Guia De Web Connect Manual (38 páginas), (Español) Manual (24 páginas), (Spanish) Guia De Seguridad Del Producto Manual (16 páginas), (Español) Manual (12 páginas), (Español) Manual (11 páginas), (Spanish) Guía De Configuración Rápida (47 páginas), (Español) Manual de funciones (19 páginas)

Check the print quality

NOTE

Make sure you put paper in the paper tray (for

MFC-J4610DW, tray #1) for the initial setup.

When the preparation process has finished, the

Touchscreen shows Set Paper and Press

Start.

Press Start.

Check the quality of the four colour blocks on

the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press Yes to

finish the quality check and go to the next step.

If you can see missing short lines, press No and

follow the steps on the Touchscreen.

Poor

Set the paper settings

(MFC-J4610DW)

For your machine to produce the best print quality and

to feed the correct paper size, the paper type and size

must be set to match the paper in the tray.

For details on the types and sizes of paper supported,

see Paper Size and Type in chapter 2 of the Basic

User's Guide.

NOTE

You can change the default tray that the machine

will use for printing copies or received faxes. (See

Tray use in Copy mode or Tray use in Fax mode

in chapter 2 of the Basic User's Guide.)

When Tray Setting appears on the

Touchscreen, press Tray Setting to set the

paper size and paper type.

Press Tray #1 to set paper size and paper

type for tray #1, or press Tray #2 to set paper

size for tray #2.

Press the size and type of paper you are using.

Press OK.