Brother HL-2275DW Manual de configuración rápida - Página 27
Navegue en línea o descargue pdf Manual de configuración rápida para Software Brother HL-2275DW. Brother HL-2275DW 35 páginas. Personal laser printer
También para Brother HL-2275DW: Especificaciones (2 páginas)
Imprimir página
Wireless Network
u
(For USB cable users)
Disconnect the USB cable between the
computer and the machine.
(For LAN cable users)
Disconnect the network cable between your
access point and the machine, and click Next.
Wireless setup is completed.
Install the printer driver
IMPORTANT
DO NOT try to cancel any of the screens
during this installation.
Note
• If there is more than one of the same model
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name. You can also confirm your IP
Address by scrolling to the right.
• You can find your machine's MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page. See Print
the Printer Settings Page on page 31.
v
Follow the on-screen instructions to complete
setup.
Note
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
The installation is now
Finish
complete.
Note
If you use a specified IP Address for the machine,
you must set the Boot Method to Static by using
the BRAdmin Light. For more information, See
Changing your machine's network settings in the
Network User's Guide.
Macintosh
27