Brother Inkjet MFC-J4710DW Manual de configuración rápida - Página 34

Navegue en línea o descargue pdf Manual de configuración rápida para Software Brother Inkjet MFC-J4710DW. Brother Inkjet MFC-J4710DW 47 páginas. Quick setup guide - spanish
También para Brother Inkjet MFC-J4710DW: Manual (36 páginas), Manual (22 páginas), Manual de seguridad del producto (17 páginas), Manual (13 páginas), Manual (13 páginas), Manual de configuración rápida (47 páginas), Manual de seguridad del producto (20 páginas), Especificaciones (2 páginas), (Español) Guia De Web Connect Manual (38 páginas), (Español) Manual (24 páginas), (Spanish) Guia De Seguridad Del Producto Manual (16 páginas), (Español) Manual (12 páginas), (Español) Manual (11 páginas), (Spanish) Guía De Configuración Rápida (47 páginas)

Imprimir página
Brother Inkjet MFC-J4710DW Manual de configuración rápida
For Wireless Network Users
Manual setup from the
18
control panel using the
Setup Wizard (Macintosh,
mobile devices and
Windows
a
Press
.
Press Setup Wizard.
When Switch Network interface to
wireless? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
b
The machine will search for available SSIDs. It
will take several seconds to display a list of
available SSIDs.
If a list of SSIDs is displayed, swipe up or down,
or press a or b to choose the SSID you wrote
down in step 17-b on page 30. Select the
SSID you want to connect with. Press OK.
If the wireless access point/router of the
selected SSID supports WPS and the machine
asks to use WPS, go to c.
If the machine asks you to enter a Network
Key, go to d.
Otherwise, go to e.
NOTE
• If a list of SSIDs is not displayed, make sure
your access point is on. Move your machine
closer to the access point and try starting
from a again.
• If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. For details, see the Network User's
Guide.
c
Press Yes to connect your machine using
WPS. (If you choose No to continue manual
configuration, go to d to enter a Network Key.)
When the Touchscreen shows to start WPS,
press the WPS button on your wireless access
point/router, and then press Next to proceed.
Go to e.
34
®
)
d
Enter the Network Key you wrote down in
step 17-b on page 30 using the Touchscreen.
Press
to cycle between lower case and
upper case. Press
letters, numbers and special characters. (The
characters available may differ depending on
your country.) To move the cursor to the left or
right, press d or c.
(For more information, see Entering Text for
Wireless Settings on page 45.)
Press OK when you have entered all the
characters, then press Yes to apply your
settings.
e
Your machine will now try to connect to your
wireless network. It may take a few minutes.
f
A connection result message appears for
60 seconds on the Touchscreen and a WLAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 36.
Wireless setup is now complete. The
Wi-Fi button at the upper right of the
Touchscreen changes to a four-level
indicator that displays the wireless signal
strength of your access point/router.
The Wi-Fi LED
lights up, indicating that the machine's
Network I/F is set to WLAN.
To install MFL-Pro Suite, continue to
step 19.
®
For Windows
users:
Now go to
Page 38

For Macintosh users:

Now go to
Page 41
to cycle between
on the control panel