AEG OKO-SANTO 1650-6 TK Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico AEG OKO-SANTO 1650-6 TK. AEG OKO-SANTO 1650-6 TK 24 páginas. Larder fridge

Prior to Initial Start–Up

Please clean the appliance interior and all accessories prior to initial

start-up (see section: "Cleaning and Care").

Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures

not be observed.

Before switching on, make sure the electricity supply voltage is the

same as that indicated on the appliance rating plate. The rating plate is

inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of

having to change the fuse in the plug supplied, a 13 amp ASTA

approved (BS 1362) fuse must be used.

Important

The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow: Earth

Blue:

Brown:

As the colours of the wires in the mains lead

of this appliance may not correspond with the

coloured markings identifying the terminals in your plug, proceed as

follows:

1.The wire coloured green and yellow must be connected to the termi-

nal marked with the letter "E" or by the earth symbol or coloured

green and yellow.

2.The wire coloured blue must be connected to the terminal "N" or

coloured black.

3.The wire coloured brown must be connected to the terminal marked

"L" or coloured red.

4.Upon completion there must be no cut, or stray strands of wire pre-

sent and the cord clamp must be secure over the outer sheath.

Warning! A cut-off plug inserted into a 13 amp socket is a serious

safety (shock) hazard. Ensure that the cut-off plug is disposed of

safely.

Neutral

Live

GREEN & YELLOW

13 AMP. FUSE

BROWN

BLUE

CORD CLAMP