AEG OKO-SANTO 2972-6 i Instrucciones de uso e instalación - Página 19
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Frigorífico AEG OKO-SANTO 2972-6 i. AEG OKO-SANTO 2972-6 i 28 páginas. Integrating fridge freezer
Imprimir página
Installation
Electrical Connection
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING Ð THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should these safety mea-
sures not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate. The rating plate
is inside, on the left.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug supplied, a 13 amp ASTA appro-
ved (BS 1362) fuse must be used.
Important!
The wires in the mains lead are coloured in accordance with the fol-
lowing code:
Green and Yellow
Blue
Brown
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
1.
The wire coloured green and yellow must be connected to the termi-
nal marked with the letter ÒEÓ or by the earth symbol or coloured green
and yellow.
2.
The wire coloured blue must be connected to the terminal marked ÒNÓ
or coloured black.
3.
The wire coloured brown must be connected to the terminal marked
ÒLÓ or coloured red.
4.
Upon completion there must be no cut, or stray strands of wire pre-
sent and the cord clamp must be secure over the outer sheath.
Warning! A cut-off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut-off plug is disposed of
safely.
Earth
Neutral
Live
19