Brother MFC-253CW Manual de inicio rápido - Página 33
Navegue en línea o descargue pdf Manual de inicio rápido para Software Brother MFC-253CW. Brother MFC-253CW 43 páginas. Inkjet dcp/mfc
También para Brother MFC-253CW: Lista de referencia de piezas (32 páginas)
Imprimir página
Wireless Network
Note
• If there is more than one machine connected to
the network, choose your machine from the list,
and then click Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
• If your wireless settings fail, an error message
will appear during the installation of MFL-Pro
Suite and the installation will be terminated.
Confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step 16-a on page 27 and setup
the wireless connection again.
• If you are using WEP and the LCD displayed
Connected but your machine is not found,
make sure you entered the WEP key correctly.
The WEP key is case sensitive.
• If the IP address of the machine is not yet
configured for use on your network, the
following screen appears.
Click OK and then click Configure IP
Address. Enter an IP address for your
machine that is suitable for your network by
following the on-screen instructions.
i
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
®
For Windows Vista
, when this screen appears,
click the check box and click Install to complete
the installation correctly.
j
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
®
Windows
33