Brother MFC-440CN Manual de configuración rápida - Página 11
Navegue en línea o descargue pdf Manual de configuración rápida para Software Brother MFC-440CN. Brother MFC-440CN 34 páginas. Quick setup guide - english
También para Brother MFC-440CN: Manual de servicio (5 páginas), Manual de instalación (23 páginas), Manual de configuración rápida (35 páginas), Manual de servicio (17 páginas)
Imprimir página
7
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and Press
2
Make sure paper is loaded in the paper tray.
Press Colour Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four colour blocks on
the sheet.
(black/yellow/cyan/magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
Yes iPress 1
iPress 2
No
Setting Up the Machine
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
OK
6
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
Yes iPress 1
iPress 2
No
Color OK?
Yes iPress 1
iPress 2
No
After pressing 1 (Yes) or 2 (No) for both black
and colour, the LCD shows:
Start Cleaning?
Yes iPress 1
iPress 2
No
7
Press 1 (Yes), the machine will then start
cleaning the colours.
8
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
Poor
9