Fujitsu fi-4530C Instrucciones de limpieza y sustitución de consumibles - Página 9

Navegue en línea o descargue pdf Instrucciones de limpieza y sustitución de consumibles para Impresora Fujitsu fi-4530C. Fujitsu fi-4530C 14 páginas. Image scanner
También para Fujitsu fi-4530C: Primeros pasos (27 páginas), Manual de procedimientos de instalación (7 páginas), Manual de procedimientos de instalación (9 páginas), Folleto y especificaciones (2 páginas), Procedimientos de instalación (3 páginas), Manual de instrucciones de limpieza (13 páginas), Instrucciones de limpieza (2 páginas), Manual de instrucciones (10 páginas), Procedimiento de instalación (5 páginas)

LEANING THE

OLLERS WITH THE

The cleaning sheets are designed to remove only loose paper dust and

ink from the rollers. Use the sheet approximately every 1,000 sheets

scanned. They are to be used in between the thorough cleanings of the

scanner. Using the cleaning paper does not take the place of the

more complete cleanings described later in this section

•

Set the Hopper Guides to

the widest width possible.

•

Spray the Cleaning Paper lightly with F1 Cleaner and place the Cleaning

paper against the right edge of the Hopper Guide. Using the Scanning

Application scan the cleaning paper. Do Not Save These Images. This

operation is used only to pass the cleaning paper through the paper feed

path. Check the path to see if it needs further cleaning, if you find debris

in the paper path perform this cleaning or the

-F

INT

REE

LOTHS

•

Place the Cleaning Paper against the Left Hopper Guide and perform the

previous step.

fi-4530C & fi-5530C C

LEANING

in the following steps.

ONSUMABLE

EPLACEMENT AND

HEET

Hopper Guides

ADF

LEANING THE

WITH

LEANING

NSTRUCTIONS