Brother MFC-J430w Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Software Brother MFC-J430w. Brother MFC-J430w 40 páginas. Product safety guide - spanish
También para Brother MFC-J430w: Manual del usuario avanzado (47 páginas), Manual (12 páginas), Manual (21 páginas), Manual de seguridad del producto (17 páginas), Manual de configuración rápida (37 páginas), Manual de seguridad (17 páginas), Manual de configuración rápida (37 páginas), Manual del usuario (41 páginas), Manual de inicio rápido (37 páginas), Manual de inicio rápido (22 páginas), (Español) Manual (21 páginas), (Español) Manual (16 páginas)

Imprimir página
Brother MFC-J430w Manual del usuario

Changing fax resolution

The quality of a fax can be improved by
changing the fax resolution.
a
Press
(FAX).
b
Press a or b to choose
Fax Resolution.
Press OK.
c
Press a or b to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
Monochrome
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Setting your changes as a
3
new default
You can save the settings for the fax options
you use most often by setting them as default,
such as Fax Resolution, Contrast,
Glass ScanSize and Real Time TX.
These settings will remain until you change
them again.
a
Press
b
Press a or b to choose the menu option
that you want to change and press OK.
Then press a or b to choose the new
option.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring fax settings to the
factory default
You can restore the fax settings
Fax Resolution, Contrast,
Glass ScanSize, and Real Time TX,
that you have changed, to the factory default.
These settings will remain until you change
them again.
a
Press
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Sending a fax
(FAX).
(FAX).
3
3
3
7