Brother MFC-J430w Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Software Brother MFC-J430w. Brother MFC-J430w 40 páginas. Product safety guide - spanish
También para Brother MFC-J430w: Manual del usuario avanzado (47 páginas), Manual (12 páginas), Manual (21 páginas), Manual de seguridad del producto (17 páginas), Manual de configuración rápida (37 páginas), Manual de seguridad (17 páginas), Manual de configuración rápida (37 páginas), Manual del usuario (41 páginas), Manual de inicio rápido (37 páginas), Manual de inicio rápido (22 páginas), (Español) Manual (21 páginas), (Español) Manual (16 páginas)

Imprimir página
Brother MFC-J430w Manual del usuario
Setting up Groups for
Broadcasting
Groups, which can be stored on a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
(Speed Dial), Search, OK, the two-digit
location and Mono Start.
First, you'll need to store each fax number in
a Speed Dial location.
(uuBasic User's Guide: Storing Speed Dial
numbers)
Then you can include them as numbers in the
Group. Each Group uses up a Speed Dial
location. You can have up to six Groups, or
you can assign up to 39 numbers to a large
Group.
(See Broadcasting (Monochrome only)
uu page 9.)
a
Press
(Speed Dial).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d
Press a or b to choose the two-digit
Speed Dial location you want to add to
the Group.
Press OK.
e
Press a or b to choose Add Number.
Press OK.
f
To add numbers to the Group, press
a or b to choose
Alphabetical Order or
Numerical Order and press OK.
Press a or b to select a number and
press OK.
Dialling and storing numbers
g
Do one of the following:
To add another number to the Group,
5
repeat steps e to f.
If you are finished adding numbers to
the Group, press a or b to choose
Complete.
Press OK.
h
Do one of the following:
To store another Group for
broadcasting, repeat steps c to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
uu page 18.)
Changing a Group name
a
Press
(Speed Dial).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose the Group name
you want to change.
Press OK.
d
Press a or b to choose
Change Group Name.
Press OK.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
5
5
15