Fujitsu S510M - ScanSnap - Document Scanner Manual de introducción - Página 18

Navegue en línea o descargue pdf Manual de introducción para Impresora Fujitsu S510M - ScanSnap - Document Scanner. Fujitsu S510M - ScanSnap - Document Scanner 35 páginas. Color image scanner
También para Fujitsu S510M - ScanSnap - Document Scanner: Procedimientos de instalación (3 páginas), Especificaciones (2 páginas), Manual de instalación rápida (2 páginas), Manual de introducción (24 páginas), Instrucciones de limpieza (2 páginas), Instrucciones de limpieza (2 páginas)

Connecting the USB Cable

■

Connect the USB cable as shown below.

• Use only the USB cable supplied with the ScanSnap.

ATTENTION

• When connecting to a USB hub, be sure to connect the ScanSnap to the hub pluged into

the computer (first stage). If you connect it to a USB hub connected to another USB hub

(second stage), the ScanSnap may not function correctly.

• If you connect the ScanSnap with USB 2.0, it is required that the USB port and the Hub

be compliant with USB 2.0. The scanning speed may slow down when you connect the

ScanSnap with USB 1.1. If your computer has the USB 2.0 compatible port, use it.

1. Remove the seal on the back side of the ScanSnap.

2. Connect the USB cable to the USB connector on the ScanSnap, and the other end of the

USB cable into the USB port on your computer.

Insert the USB cable into the connector all the way to the end.

3. The connection of the USB cable is complete.

Then, follow the procedure described in "Turning the ScanSnap ON" (page 18).

USB connector

USB cable

DC 16V

Seal